Portlogdumpport - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

portLogDumpPort

Displays the port log of a specified port without page breaks.
Synopsis portlogdumpport portid
Description Use this command to display the port log of a specified port. The command displays all entries in
the log without any page breaks. It is identical to portLogShowPort, except that portLogShowPort
prompts you to press Enter between each page.
Port logs are circular log files in the switch firmware which can save up to 8,192 entries. Refer to
portLogConfigShow to display the current port log size. Once the log is full, the newest log entries
displace the oldest log entries. Port logs capture switch-to-device, device-to-switch,
switch-to-switch, some device-to-device1, and control information
If the port log is disabled, the following message displays as the first line. Refer to portLogClear
command for more information.
Refer to the Fabric OS Administrator's Guide for more information.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
portid
Examples To display the port log dump for a port:
See Also portLogClear, portLogShow, upTime
Fabric OS Command Reference
53-1001186-01
WARNING: port log is disabled
Specify the port area or index number.
switch:user> portlogdumpport 14
time task
------------------------------------------------------
08:35:27.899 tShell
08:35:27.899 tReceive
08:35:27.916 tReceive
08:35:28.416 interrupt
08:35:28.433 tFabric
08:35:28.433 tFabric
08:35:28.433 tReceive
08:35:28.433 tReceive
08:35:28.433 tTransmit
08:35:28.433 tFabric
08:35:28.466 tFabric
08:35:28.466 tFabric
08:35:28.466 tReceive
08:35:28.466 tReceive
08:35:28.483 tFabric
08:35:28.483 tReceive
08:35:28.483 tReceive
08:35:28.483 tTransmit
08:35:28.483 tFabric
08:35:28.483 tFabric
event port cmd args
pstate 14 OL1
pstate 14 LR2
pstate 14 AC
scn 14 1
ioctl 14 90 101d9910,0
Tx 14 164 02fffffd,00fffffd,0005ffff,10000000
Rx 14 0 c0fffffd,00fffffd,00050006
Rx 14 164 03fffffd,00fffffd,00050006,02000000
Tx 14 0 c0fffffd,00fffffd,00050006
ioctl 14 91 103646d8,0
ioctl 14 a7 3c,1
pstate 14 LR1
pstate 14 LR3
pstate 14 AC
Tx 14 96 02fffffd,00fffffd,0006ffff,11100060
Rx 14 0 c0fffffd,00fffffd,00060007
Rx 14 96 03fffffd,00fffffd,00060007,02100060
Tx 14 0 c0fffffd,00fffffd,00060007
ioctl 14 a1 0,0
scn 14 5
2
portLogDumpPort
605