Cfgdelete - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

cfgDelete

Deletes a zone configuration.
Synopsis cfgdelete "cfgName"
Description Use this command to delete a zone configuration.
This command changes the Defined Configuration (see cfgShow). For the change to become
effective, enable the configuration with the cfgEnable command. For the change to be preserved
across switch reboots, save the configuration to nonvolatile memory with the cfgSave command.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operand is required:
"cfgName"
Examples To delete a zone configuration:
See Also cfgAdd, cfgClear, cfgCreate, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow
Fabric OS Command Reference
53-1001186-01
Specify a name for the zone configuration to be deleted, in quotation marks.
switch:admin> cfgdelete "USA_cfg"
2
cfgDelete
67