Fwset - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

fwSet

Sets port persistence time.
Synopsis fwset --port --persistence seconds
Description Use this command to set port persistence time, a parameters controlled by Fabric Watch. Port
persistence time specifies the time in seconds during which a port must persistently be in a
marginal state before being labeled as such.
Notes This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands The following operands are required:
--port --persistence seconds
Examples To set the port persistence time to 18 seconds:
See Also fwShow
Fabric OS Command Reference
53-1001186-01
Specifies the time, in seconds, during which a port must be persistently in a
marginal state before being recognized as such.
switch:user> fwset port
--
persistence 18
--
2
fwSet
317