Burninstatus - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

burninStatus

burninStatus
Displays the diagnostics burn-in status.
Synopsis burninstatus [[--slot] slotnumber]
Description Use this command to display the burn-in status of blade in a specified slot. Command output
includes the slot number, state, current run number, current command in the run, total commands
in a run, and the burn-in script name.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands The following operands are optional:
--slot slotnumber
Examples To display the burn-in status for all slots:
To display the burn-in status for slot 3:
See Also none
62
Specify a slot number to get the burn-in status of a single slot. If no slot is
specified, the burn-in status for all slots are displayed.
switch:admin> burninstatus
Slot State Status
1 ABORT PASS
2 ABORT PASS
3 ABORT PASS
4 ABORT FAIL
switch:admin> burninstatus
Slot State Status
3 ABORT PASS
Run Cmd TotCmds PID
3 18 41
3 18 41
3 18 41
3 11 34
slot 3
--
Run Cmd TotCmds PID
3 18 41
Script
916 burnin
920 burnin
923 burnin
926 burnin
Script
923 burnin
Fabric OS Command Reference
53-1001186-01