Switchshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual

switchshow

Displays switch and port status.
Synopsis switchshow [-portcount] [-iscsi]
Description Use this command to display switch and port status information. Information might vary by switch
model: for instance, number of ports and domain ID values.
Note
For all Bloom and Bloom 2-based platforms, private device targets are displayed in switchShow. For
Condor or Goldeneye-based platforms, private device targets are not displayed in switchShow.
The output displays switch summary information followed by port summary information. Switch
summary information is as follows:
switchName
switchType
switchState
switchMode
switchRole
switchDomain
switchId
switchWwn
switchBeacon
bladeBeacon
zoning
FC Router
FC Router BB Fabric ID
The switch summary is followed by one-line description for non-EX_Ports and one or two lines for
Ex_Ports:
Area
Index
Slot
Port
Address
Media Type
Fabric OS Documentation Addendum
Publication Number: 53-1000429-01-HP
The switch's symbolic name.
The switch's model and revision numbers.
The switch's state: online, offline, testing, or faulty.
The switch's operation mode: native, interop, or Access Gateway.
The switch's role: principal, subordinate, or disabled.
The switch's domain ID: 0-31 or 1-239.
The switch's embedded port D_ID.
The switch's World Wide Name (WWN).
The switch's beaconing state (on or off).
The blade's beaconing state (on or off).
Displays (in brackets) the name of the active zone when agmode is disabled.
The FC Router's state (on or off)
The backbone fabric ID for FC routing.
Part of the 24-bit Address Identifier, which consists of domain, area number, and
optional AL_PA. Area column is only displayed for non-slot based platforms.
Index will follow Area up to 255. Then it will continue to the maximum port of
the platform. Index is to identify the port number relative to the switch. Index
column is only displayed for slot-based platforms.
Slot number; 1-4 and 7-10.
Port number; 0-15, 0-31 or 0-47.
The 24-bit Address Identifier. Address column is only displayed for slot-based
platforms.
Media types include:
1
switchshow
1-53