Stopporttest - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

stopPortTest

stopPortTest
Terminates the running portTest.
Synopsis stopporttest [-ports itemlist]
Description Use this command to stop the currently running portTest. Refer to the portTest command for more
information.
If portTest is running on a non-singlemode, use stopPortTest to stop the test.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
-ports itemlist
Examples To stop the portTest command:
See Also portLoopbackTest, portTest, portTestShow, spinFab
602
Specify a list of user ports to test. By default, all the user ports in the switch
are tested. Refer to itemList help pages for further details.
switch:admin> stopporttest
Fabric OS Command Reference
53-1000599-01