Nbrstatsclear - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

nbrStatsClear

nbrStatsClear
Resets FSPF interface counters.
Synopsis nbrstatsclear [slotnumber/][portnumber]
Description Use this command to reset the counters of FSPF frames transmitted and received on each
interswitch link (ISL) or a specific ISL. These counters display using the using the interfaceShow
command.
Use this command without operands to reset counters on all interfaces.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber
portnumber
When this command is executed without operand, the statistics are cleared for all interfaces.
Examples To reset the counters on a port:
350
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is optional; if omitted, FSPF
statistics are reset.
switch:admin> interfaceshow 1/0
idbP = 0x10050a38
Interface 0 data structure:
nghbP = 0x1004ce68
ifNo = 0
masterPort = 0 (self)
defaultCost = 500
cost = 500
delay = 1
(output truncated)
nCmdAcc = 37
nInvCmd = 0
nHloIn = 10
nInvHlo = 0
nLsuIn = 17
nLsaIn = 10
attHloOut = 11
nHloOut = 11
attLsuOut = 12
nLsuOut = 12
attLsaOut = 17
nLsaOut = 17
switch:admin> nbrstatsclear 1/0
switch:admin> interfaceshow 1/0
idbP = 0x10050a38
Fabric OS Command Reference
53-1000599-01