Fwconfigreload - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

fwConfigReload

fwConfigReload
Reloads the Fabric Watch configuration.
Synopsis fwconfigreload
Description Use this command to reload the Fabric Watch configuration. This command should only be used
after downloading a new Fabric Watch configuration file from a host.
This command requires a Fabric Watch license.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To reload the saved Fabric Watch configuration:
See Also configDownload, configUpload, fwClassInit, fwConfigure, fwShow
232
switch:admin> fwconfigreload
fwConfigReload: Fabric Watch configuration reloaded
Fabric OS Command Reference
53-1000599-01