Dlsreset - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

2

dlsReset

dlsReset
Disables the dynamic load sharing (DLS) option.
Synopsis dlsreset
Description Use this command to turn off DLS when a fabric change occurs. Refer to dlsSet for a full
description of load sharing.
This command should be used only if devices connected to the fabric cannot handle occasional
routing changes correctly.
Notes The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing
policies.
Operands none
Examples To disable the dynamic load sharing option:
See Also aptPolicy, dlsSet, dlsShow
116
switch:admin> dlsreset
Committing configuration...done.
switch:admin> dlsshow
DLS is not set
Fabric OS Command Reference
53-1000599-02