Secure Fabric Os Commands - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual

TABLE 6
Command
perfDelFilterMonitor
perfMonitorClear
perfMonitorShow
perfShowPortEEMask
perfShowAlpaCrc
perfShowEEMonitor
perfShowFilterMonitor
perfShowPortEEMask

Secure Fabric OS Commands

The following commands are available with the purchase of a Brocade Security license key. For
more detailed information about security, refer to the Secure Fabric OS Administrator's Guide.
TABLE 7
Command
pkiCreate
pkiRemove
pkiShow
secActiveSize
secAuthSecret
secCertUtil
secDefineSize
secFabricShow
secFCSFailover
secGlobalShow
secHelp
secModeDisable
secModeEnable
secModeShow
secNonFCSPasswd
secPolicyAbort
secPolicyActivate
secPolicyAdd
secPolicyCreate
Fabric OS Command Reference Manual
53-1000436-01
Performance Monitoring Commands (Continued)
Description
Deletes a filter-based monitor.
Clears counters of end-to-end, filter-based, and ISL performance
monitors on a port.
Displays end-to-end, filter-based, and ISL monitors on a port.
Sets overall mask for end-to-end (EE) monitors.
Displays the AL_PA CRC count by port or by AL_PA.
Displays user-defined end-to-end monitors on a port.
Displays filter-based monitors for a port.
Displays the current end-to-end mask of a port.
Brocade Secure Fabric OS Commands
Description
Creates public key infrastructure (PKI) objects.
Removes existing public key infrastructure (PKI) objects.
Displays existing public key infrastructure (PKI) objects.
Displays the size of the active security database.
Manages the DH-CHAP shared secret key information.
Manages third-party PKI-based certificates in the switch.
Displays the size of the defined security database.
Displays security related fabric information.
Enables a backup FCS switch to take over as primary FCS switch.
Displays the current internal security state information.
Displays information about security telnet commands.
Disables security mode.
Enables security mode.
Displays if security mode is enabled or disabled.
Sets the admin password for non-FCS switches.
Aborts all changes to the defined database that have not been saved.
Applies defined policy set to all switches in the fabric.
Adds members to an existing policy.
Creates a new policy.
Secure Fabric OS Commands
3
747