Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 494

2
portCfgISLMode
Operands This command has the following operands:
slotnumber
portnumber
mode
Examples To enable ISL R_RDY mode on a port:
To disable ISL R_RDY mode on a port:
See Also configure, portCfgLongDistance, portCfgShow
462
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports.
Specify 1 to enable ISL R_RDY mode. Specify 0 to disable ISL R_RDY mode.
switch:admin> portcfgislmode 1/3, 1
ISL R_RDY Mode is enabled for port 3. Please make sure the PID
formats are consistent across the entire fabric.
switch:admin> portcfgislmode 1/3, 0
Fabric OS Command Reference Manual
53-1000436-01