Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 138

2
configure
Application Attributes
Application HTTP, SNMP, and RPCd attributes are configurable; by default, all three attributes are
enabled. Refer to the table for the application attributes that can be changed.
TABLE 8
Application
ssl
http
snmp
rpcd
cfgload
The secure protocols must not be enabled before setting SSL attributes correctly.
Operands none
Examples To modify configuration settings on a switch:
:See Also agtCfgDefault, agtCfgSet, agtCfgShow, configDefault, configShow, ipAddrSet,
portCfgLongDistance, switchDisable, switchEnable, upTime
106
Configurable Application Attributes
File
Certificate File
CA Certificate File
Length of crypto key
HTTP Enabled
Secure HTTP Enabled
SNMP Security Level
RPCd Enabled
Secure RPCd Callback
Secure Config Upload and Download
switch:admin> configure
configure
System services (yes, y, no, n): [no]
ssl attributes (yes, y, no, n): [no]
snmp attributes (yes, y, no, n): [no] y
Select SNMP Security Level:
(0 = No security, 1 = Authentication only, 2 = Authentication and Privacy):
(0..2) [0]
Type Default
string not set
string not set
number 128
boolean Yes
boolean Off
number 0
boolean On
boolean Off
boolean Off
Fabric OS Command Reference Manual
Range
varies
varies
40, 56, 128
Yes/No
On/Off
0, 1, 2
On/Off
On/Off
On/Off
53-1000436-01