Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 291

TABLE 12
Class
Fabric
FFL_Port (Optical
FFL_Port (Copper)
Resource class
EE Performance Monitor
Filter Performance Monitor
Resource
Not all platforms support fans or power supplies. If you attempt to configure values for these items
the following displays: "ERROR: No threshold available.
Operands This command has the following optional operands:
--enable --port portNumber
--disable --port portNumber
Examples To configure thresholds in Fabric OS mode:
Fabric OS Command Reference Manual
53-1000436-01
Access Gateway Mode
Enables all thresholds associated with a certain port.
Disables all thresholds associated with a certain port.
switch:admin> fwconfigure
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa performance Monitor class
8 : EE performance Monitor class
9 : Filter performance Monitor class
10 : Security class
11 : Resource class
12 : Quit
Select a class => : (1..12) [1] 1
1 : Temperature
2 : Fan
3 : Power Supply
4 : return to previous page
Select an area => : (1..4) [4] 1
Index ThresholdName
LastEvent
Area
E_Port downs
Fabric reconfigure
Domain ID changes
Segmentation changes
Zone changes
Fabric<->QL
Fabric logins
SFP state changes
Same as Port class
Same as Port class
Flash area
Invalid CRCS
RX Performance
TX Performance
Customer Defined
Flash
Status
LastEventTime
fwConfigure
CurVal
LastVal LastState
2
259