Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 274

2
firmwareDownloadStatus
See Also firmwareCommit, firmwareDownload, firmwareRestore, firmwareShow
242
Slot 8 (FR4-18i): Firmware commit has started on the blade. This may take up to
10 minutes.
[10]: Mon Dec 19 18:50:51 2005
Slot 8 (FR4-18i): The commit operation has completed successfully.
[11]: Mon Dec 19 18:55:39 2005
Slot 5 (CP0, active): Firmware has been downloaded successfully on Standby CP.
[12]: Mon Dec 19 18:55:46 2005
Slot 5 (CP0, active): Standby CP reboots.
[13]: Mon Dec 19 18:57:06 2005
Slot 5 (CP0, active): Standby CP booted successfully with new firmware.
[14]: Mon Dec 19 18:57:10 2005
Slot 5 (CP0, active): Firmware commit operation has started on both active and
standby CPs.
[15]: Mon Dec 19 19:01:38 2005
Slot 5 (CP0, active): Firmware commit operation has completed successfully on
active CP.
[16]: Mon Dec 19 19:01:39 2005
Slot 5 (CP0, active): Firmwaredownload command has completed successfully. Use
firmwareshow to verify the firmware versions.
Fabric OS Command Reference Manual
53-1000436-01