Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 511

To set the fabric ID of port 2/21 to 5 and the port ID format to core:
To configure port 2/20 to be an VEX_Port and set the fabric ID to 4:
To disable fabric parameter negotiation on port 2/20 of an VEX_Port:
See Also portCfgEXPort, portDisable, portEnable, portShow
Fabric OS Command Reference Manual
53-1000436-01
switch:admin> portcfgvexport 2/16
Port 2/16
Admin:
State:
Pid format:
Edge Fabric ID:
Front Domain ID:
Front WWN:
Principal Switch:
principal WWN:
Fabric Parameters:
R_A_TOV:
E_D_TOV:
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
switch:admin> portcfgvexport 2/21 -f 5 -p 1
switch:admin> portcfgvexport 2/20 -a 1 -f 4
switch:admin> portcfgvexport 2/20 -t 2
info
enabled
OK
core(N)
16
160
50:06:06:9e:20:9f:ce:10
7
10:00:00:60:69:c0:05:8a
Auto Negotiate
9000(N)
2000(N)
2
portCfgVEXPort
479