Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 50

Brocade fabric os command reference manual - supporting fabric os v5.3.0 (53-1000436-01, june 2007)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

2
ag
--failbackdisable <N_Port>
Examples
To show the options for ag:
--show
--modeshow
--modeenable
--modedisable
--mapshow [N_Port]
--mapset <N_Port> "<F-ports>"
--mapadd <N_Port> "<F-ports>"
--mapdel <N_Port> "<F-ports>"
--failovershow [N_Port]
--failoverdisable <N_Port>
--failoverenable <N_Port>
--failbackshow [N_Port]
--failbackdisable <N_Port>
--failbackenable <N_Port>
To display all the F_Ports that are mapped to a given N_Port:
18
Disables the failback policy for an N_Port
switch:admin> ag --help
Usage: ag <action> [<arguments>]
switch:admin> ag --modeshow
Access Gateway mode is enabled.
switch:admin> ag --modeshow
Access Gateway mode is NOT enabled.
switch:admin> ag --show
Name
: switch
NodeName
: 10:00:00:05:1e:04:06:bb
Number of Ports
: 24
IP Address(es)
: 10.32.173.66, fec0:60:69bc:66:205:1eff:fe36:1199
Firmware Version
: v5.3.0_rel_bld46
N_Ports
: 2
F_Ports
: 2
Attached N_Port information:
Port
PortID
-------------------------------------------------------------------
17
0x023d00
19
0x023c00
--------------------------------------------------------------------
Attached F_Port information:
Port
PortID
-------------------------------------------------
1
0x023d01
9
0x023d02
-------------------------------------------------
Note: "ag --show" always shows the current online information.
switch:admin> ag --mapshow
N_Port
Configured_F_Ports
---------------------------------------------------------------
0
15;16
17
1;2;21
Displays the AG's configuration and state
Displays agmode setting for the switch
Enables AG mode on the switch
Disables AG mode on the switch
Shows N-port Mapping
Sets the F_Port mapping
Adds the F_Ports to existing N_Port mapping
Deletes F_Ports from N_Port Mapping
Displays the failover policy for the N_Port(s)
Disables failover policy for an N_Port
Enables failover policy for an N_Port
Displays the failback policy for an N_Port
Disables the failback policy for an N_Port
Enables the failback policy for an N_Port
PortWWN
20:3d:00:05:1e:37:12:2a
20:3c:00:05:1e:37:12:2a
Port WWN
10:00:00:00:c9:56:b3:46
50:06:0b:00:00:6a:57:70
Current_F_Ports
None
1;9
FO
FB
IP_Addr
1
1
10.32.173.52
1
1
10.32.173.52
N_Port
17
17
Failover
Failback
1
1
1
1
Fabric OS Command Reference Manual
F_Ports
1;9;
None
53-1000436-01

Advertisement

Table of Contents
loading

Table of Contents