secTransAbort
Aborts current security transaction.
Synopsis
sectransabort
Description
Use this command to abort the current transaction. This command is used to recover from
management application problems. This command aborts all current changes that have not been
committed or activated.
When secure mode is enabled, this command should be used only on the FCS switch to abort the
current security transaction.
Operands
none
Examples
To abort the current security transaction:
See Also
secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete, secPolicyDump,
secPolicyRemove, secPolicySave, secStatsShow
Fabric OS Command Reference Manual
53-1000436-01
switch:admin> sectransabort
Transaction has been aborted.
2
secTransAbort
599