Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 766

2
zoneCreate
devices. This zone must be named "broadcast". Only one broadcast zone can exist within a fabric.
This type of zone is hardware enforced; the switch controls data transfer to a port.
When secure mode is enabled, this command can be issued only from the primary FCS switch.
Operands The following operands are required:
"zonename"
"member"
Examples To create three zones using a combination of port numbers and zone aliases:
See Also zoneAdd, zoneDelete, zoneRemove, zoneShow
734
Name for a zone to be created, in quotation marks. Quotation marks are
optional. This name cannot be used for any other zone object. Zone names
are limited to 64 characters.
List of members to be included in zone, in quotation marks, separated by
semicolons. Quotation marks are required. Can be one or more of the
following:
A switch domain and port area number pair: for example, "2, 20". View the
area numbers for ports using the switchShow command.
World Wide Names.
QuickLoop AL_PAs.
Zone alias names.
sw5:admin> zonecreate "Red_zone", "1,0; loop1"
sw5:admin> zonecreate "Blue_zone", "1,1; array1; 1,2; array2"
sw5:admin> zonecreate "Green_zone", "1,0; loop1; 1,2; array2"
Fabric OS Command Reference Manual
53-1000436-01