Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 60

2
agtCfgSet
See Also agtCfgDefault, agtCfgShow snmpConfig,
SW_v5_x.mib, "Switch Management Information & Switch Enterprise Specific Trap",
RFC1157, "A Simple Network Management Protocol (SNMPv1)",
RFC1213, "Management information Base for Network Management of TCP/IP-based Internets:
MIB-II"
28
Community (rw): [OrigEquipMfr]
Trap Recipient's IP address: [1080::8:800:200C:1230] 10.32.147.113
Community (rw): [private]
Trap Recipient's IP address: [0.0.0.0]
Community (ro): [public]
Trap Recipient's IP address: [0.0.0.0]
Community (ro): [common]
Trap Recipient's IP address: [0.0.0.0]
Community (ro): [FibreChannel]
Trap Recipient's IP address: [0.0.0.0]
SNMP access list configuration:
Access host subnet area: [0.0.0.0] 1080::8:800:200C:1234/64
Read/Write? (true, t, false, f): [true]
Access host subnet area: [1080::8:800:200C:1234] 10.32.147.255
Read/Write? (true, t, false, f): [true]
Access host subnet area: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Access host subnet area: [0.0.0.0]
Read/Write? (true, t, false, f): [true]
Fabric OS Command Reference Manual
53-1000436-01