Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 668

2
spinFab
-setfail mode
Examples To test cascading ISL links:
Diagnostics When it detects failure(s), the test might report one or more of the following error messages:
Refer to the Fabric OS Message Reference for more information.
636
Instruct spinFab how to mark failed ports. If set to 1, it will mark failing ports
as FAILED. If set to 0, it will not mark failed ports as FAILED. It is to minimize
the impact on live fabrics. This test normally logs errors but does not set the
port status to FAILED. This parameter is provided to force the failing ports to
be marked as FAILED in the same manner as other diagnostics. In test or
qualification environments without live traffic, this might be useful with large
values of -nmegs count. This mode is disabled by default.
switch:admin> spinfab -ports 1/0 - 1/2
spinfab running...
spinfab: Completed 11 megs, status:
port 0 test status: 0x00000000 --
port 1 test status: 0x00000000 --
port 2 test status: 0x00000000 --
Test Complete: "spinfab" Pass 10 of 10
Duration 0 hr, 0 min & 41 sec (0:0:41:877).
passed.
DATA
ERR_STAT
ERR_STATS
ERR_STATS_2LONG
ERR_STATS_BADEOF
ERR_STATS_BADOS
ERR_STATS_C3DISC
ERR_STATS_CRC
ERR_STATS_ENCIN
ERR_STATS_ENCOUT
ERR_STATS_TRUNC
ERR_STAT_2LONG
ERR_STAT_BADEOF
ERR_STAT_BADOS
ERR_STAT_C3DISC
ERR_STAT_CRC
ERR_STAT_ENCIN
ERR_STAT_ENCOUT
ERR_STAT_TRUNC
FINISH_MSG_ERR
INIT
MBUF_STATE_ERR
NO_SEGMENT
PORT_ABSENT
PORT_DIED
PORT_ENABLE
PORT_M2M
PORT_STOPPED
PORT_WRONG
RXQ_RAM_PERR
STATS
STATS_C3FRX
STATS_FRX
STATS_FTX
TIMEOUT
XMIT
passed.
passed.
passed.
passed.
Fabric OS Command Reference Manual
53-1000436-01