Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 507

To display the configuration settings for a port:
To display the configuration settings for a port with agmode enabled:
See Also portCfg, portCfgEPort, portCfgGPort, portCfgLongDistance, portCfgLPort, portCfgNPIVPort,
portCfgSpeed, portCfgTrunkPort
Fabric OS Command Reference Manual
53-1000436-01
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
DSCP Marking (Control): 10, DSCP Marking (Data): 50
switch:admin> portcfgshow ge0
Persistent Disable:
Mode:
Ipif configuration:
Interface IP Address
----------------------------------------------------------
0 192.168.255.107 255.255.255.0
Arp configuration:
IP Address Mac Address
------------------------------
Iproute Configuration:
IP Address Mask
------------------------------------------------------
Fciptunnel configuration:
-------------------------------------------
Tunnel ID 7
Remote IP Addr 192.168.255.17
Local IP Addr 192.168.255.107
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:37:00:20
Compression off
Fastwrite off
Tape Pipelining off
Uncommitted bandwidth, minimum of 1000 Kbps (0.001000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
DSCP (Control): 10, DSCP (Data): 50
switch:admin> portcfgshow
Ports of Slot 0 0
-----------------+--+--+--+--+----+--+--+--+----+--+--+--+----+--+--+--
Speed AN AN AN AN
Locked N_Port .. .. .. ..
Persistent Disable.. .. .. ..
NPIV capability ON ON ON ON
where AN:AutoNegotiate, ..:OFF, ??:INVALID,
SN:Software controlled AutoNegotiation.
OFF
FCIP
NetMask
Gateway
1 2 3 4 5 6 7
AN AN AN AN
.. .. .. ..
.. .. .. ..
ON ON ON ON
portCfgShow
MTU
1500
Metric
8 9 10 11 12 13 14 15
AN AN AN AN AN AN AN AN
.. .. ON ON .. ON ON ON
.. .. .. .. .. .. .. ..
ON ON ON ON ON ON ON ON
2
475