Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 675

-spd_mode mode
0
1
2
4
5
6
7
8
7,5
8,6
-verbose mode
-ports itemlist
Examples To perform a functional test on selected ports:
Fabric OS Command Reference Manual
53-1000436-01
Specify the speed mode for the test. This parameter is used only for Bloom
and Condor ASIC-based products, where it controls the speed at which each
port is operated. For 1 Gbit/sec-only products, it is ignored. The exact
operation of modes 5 through 8 depends upon the loopback mode selected.
When speed modes 5 through 8 are used with cables, they must be
connected EVEN to ODD or the test will fail.
Run test at 1 Gbit/sec, 2 Gbit/sec, and 4 Gbit/sec.
Run test at 1 Gbit/sec.
Run test at 2 Gbit/sec (Bloom default).
Run test at 4 Gbit/sec (Condor default).
For -lb_mode set to 1, the following speed modes are available to test the
speed negotiation:
Set all even ports' speed to 1 Gbit/sec; set all odd ports' speed to auto
negotiate.
Set all even ports' speed to 2 Gbit/sec; set all odd ports' speed to auto
negotiate.
Set all even ports' speed to auto negotiate; set all odd ports' speed to 1
Gbit/sec.
Set all even ports' speed to auto negotiate; set all odd ports' speed to 2
Gbit/sec.
For -lb_mode set to 2 or 3, the following speed modes are available to test
FIFO underrun:
Set all even ports' speed to 2 Gbit/sec; set all odd ports' speed to 1 Gbit/sec.
Set all even ports' speed to 1 Gbit/sec; set all odd ports' speed to 2 Gbit/sec.
Specify a nonzero value to display more detailed information during the test.
This mode should be used for debugging purposes. This operand is optional.
Specify a list of user ports to test. By default, all of the user ports in the
current switch are tested. Refer to itemList for further details.
switch:admin> spinsilk -ports 1/0 - 1/2
Running Spin Silk .............
One moment please ...Ports Segmented (0)
switchName: switch
switchType: 10.1
switchState: Offline
switchRole: Disabled
switchDomain: 1 (unconfirmed)
switchId: fffc01
switchWwn: 10:00:00:60:69:80:03:0c
switchBeacon: OFF
blade1: Beacon: OFF
blade2: Beacon: OFF
blade3: Beacon: OFF
blade4: Beacon: OFF
Area Slot Port Gbic Speed State
2
spinSilk
643