Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 662

2
snmpConfig
To display the mibCapability configuration:
See Also agtCfgDefault, agtCfgSet, agtCfgShow, snmpMibCapSet, snmpMibCapShow
SW_v5_x.mib, "Switch Management Information & Switch Enterprise Specific Trap"
RFC1157, "A Simple Network Management Protocol (SNMPv1)"
RFC1213, "Management information Base for Network Management of TCP/IP-based internets:
MIB-II"
RFC2574, "User-based Security Model (USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)"
630
Read/Write? (true, t, false, f): [true]
Committing configuration...done.
switch:admin> snmpconfig --show mibCapability
FE-MIB: YES
SW-MIB: YES
FA-MIB: YES
FICON-MIB: YES
HA-MIB: YES
SW-TRAP: YES
swFCPortScn: YES
swEventTrap: YES
swFabricWatchTrap: YES
swTrackChangesTrap: NO
FA-TRAP: YES
connUnitStatusChange: YES
connUnitEventTrap: NO
connUnitSensorStatusChange: YES
connUnitPortStatusChange: YES
SW-EXTTRAP: NO
FICON-TRAP: NO
HA-TRAP: YES
fruStatusChanged: YES
cpStatusChanged: YES
fruHistoryTrap: NO
Fabric OS Command Reference Manual
53-1000436-01