Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 602

2
secModeEnable
To enable secure mode using --quickmode:
To enable secure mode using --currentpwd --fcs "*":
570
Changing password for admin
New FCS switch admin password:
Re-type new password:
Changing password for user
New fabric wide user password:
Re-type new password:
Changing password for admin
New Non FCS switch admin password:
Re-type new password:
Broadcast message from root Thu Feb 26 02:58:52 2004...
Security Policy or Password Change: root factory admin user will be
logged out on switch 0
Connection closed by foreign host.
user@hostmachine{238}%
fcsprimary:admin> secmodeenable --quickmode
Your use of the certificate-based
installed on this equipment is subject to the End User License Agreement
provided with the equipment and the Certification
which you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the
these documents. If you
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms?
This command requires Switch Certificate,
license to be installed on
NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
(yes, y, no, n): [no] y
ARE YOU SURE
Please enter current admin account password:
Secure mode is enabled.
fcsprimary:admin> secmodeenable --currentpwd --fcs "*"
Your use of the certificate-based
installed on this equipment is subject to the End User License Agreement
provided with the equipment and the Certification
you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the terms of these
documents. If you do not agree to the terms of these documents,
promptly contact the entity from which you obtained this software and do
security features
do not agree to the terms of these documents,
(yes, y, no, n): [no] y
Security license and Zoning
every switch in the fabric.
security features
of the software
Practices Statement,
terms of
of the software
Practices Statement, which
Fabric OS Command Reference Manual
53-1000436-01