Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 654

2
slotShow
INITIALIZING
ENABLED
ENABLED (User Ports Disabled)
DISABLED
FAULTY
UNKNOWN
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display the status of all slots in the system:
See Also bladeDisable, bladeEnable, chassisShow, slotPowerOff, slotPowerOn
622
The blade is present, powered on, and initializing hardware components.
The blade is on and enabled.
The blade is on but the external ports are disabled using bladeDisable.
The blade is powered on but disabled.
The blade is faulty because an error was detected.
The blade is inserted but its state cannot be determined.
switch:user> slotshow
Slot Blade Type ID
---------------------------------
1 SW BLADE 17 FAULTY
2 SW BLADE 17 DISABLED
3 SW BLADE 17 ENABLED(User Ports Disabled)
4 SW BLADE 17 DIAG RUNNING POST2
5 CP BLADE 16 ENABLED
6 CP BLADE 16 ENABLED
7 AP BLADE 24 LOADING
8 SW BLADE 17 DIAG RUNNING POST1
9 SW BLADE 17 INSERTED, NOT POWERED ON
10 UNKNOWN
Status
VACANT
Fabric OS Command Reference Manual
53-1000436-01