Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 478

2
portBufferShow
When there is no connection to a port or the port is disabled, or the port is not an E_Port some of
the information in this display is not relevant, such as long distance mode, needed buffers, and link
distance. In this case, the irrelevant fields display as hyphens.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands The operands are as follows:
slotnumber
portnumber
Examples To display the long distance information a port:
See Also portCfgLongDistance
446
For bladed systems only, specifies the slot number of the port group to
display, followed by a slash (/).
Specifies the number of a port associated with the port group to display,
relative to its slot for bladed systems. Use switchShow for a list of valid ports.
This operand is optional; if omitted, this command displays the long distance
buffer information for all the port groups of the switch. In the case where this
command displays information for all the port groups of the switch, a divider
line displays between the ports of each port group to assist in readability.
switch:user> portbuffershow 17
User Port Lx Max/Resv Buffer Needed
Port Type Mode Buffers
---- ---- ---- -------
16 -
17 E L1
18 -
19 -
Usage Buffers
------ ------- ---------- ---------
- 0 -
- 54 54
- 0 -
- 0 -
Link Remaining
Distance Buffers
-
50km
-
- 54
Fabric OS Command Reference Manual
53-1000436-01