Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 708

2
switchShow
Address
Media Type
Speed
Port State
No_Card
No_Module
Mod_Val
Mod_Inv
No_Light
No_Sync
In_Sync
Laser_Flt
Port_Flt
Diag_Flt
Lock_Ref
Testing
Offline
Online
676
The 24-bit Address Identifier. Address column is only displayed for slot-based
platforms.
Media types include:
-- no module present
sw shortwave laser
w longwave laser
cu copper
id serial ID
The speed of the port:
1/8G 125 Mbit/sec
1/4G 250 Mbit/sec
1/2G 500 Mbit/sec
1G 1 Gbit/sec fixed transfer speed
N1 1 Gbit/sec negotiated transfer speed
2G 2 Gbit/sec fixed transfer speed
N2 2 Gbit/sec negotiated transfer speed
4G 4 Gbit/sec fixed transfer speed
N4 4 Gbit/sec negotiated transfer speed
AN Auto negotiating
UN Unknown
Port state information:
No interface card present.
No module (GBIC or other) present.
Module validation in process.
Invalid module.
Module not receiving light.
Module receiving light but out of sync.
Module receiving light and in sync.
Module signaling a laser fault.
Port marked faulty.
Port failed diagnostics.
Locking to the reference signal.
Running diagnostics.
Connection not established (for virtual ports only).
Port is up and running.
Fabric OS Command Reference Manual
53-1000436-01