Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 349

To add a new member to an existing DD set (the new DD, iscsidd3, must exist already)
To enable a DD set:
To disable a DD set:
To display the DD set database in verbose mode:
To delete a DD set:
To display the iSCSI-aware switches and their operational states
To display the iSCSI initiators that attempted to login:
Fabric OS Command Reference Manual
53-1000436-01
switch:admin> iscsicfg --create ddset -n myddset -d mynewdd
The operation completed successfully.
switch:admin> iscsicfg --add ddset -n myddset -d iscsidd3
The operation completed successfully.
switch:admin> iscsicfg --enable ddset -n myddset
This will enable the DDSet specified. Continue [N]: y
switch:admin> iscsicfg --disable ddset
The operation completed successfully.
switch:admin> iscsicfg --show ddset -v
Number of records found: 1
Name:
State/Status:
Num. members:
mynewdd
iqn.2222-23.mytest1
iqn.2343-58.newtest1
iqn.2222-23.mytest3
switch:admin> iscsicfg --delete ddset -n myddset -d mynewdd
The operation completed successfully.
switch:admin> iscsicfg --show fabric
Switch ID Switch WWN
* 1 10:00:00:60:69:e4:20:1e
Aggregated iSCSI database state for fabric:
Displays switches that are capable of propagating iSCSI data base.
switch:admin> iscsicfg --show initiator
Number of records found: 1
Name
iqn.1991-05.com.brocade:initiator1
switch:admin> iscsicfg --show initiator -i iqn.1991-05.com.brocade:initiator1
myddset
Disabled/Defined
1
Switch State iSNSC
--
IP Address
172.16.14.101
iscsiCfg
Disabled
In Sync
2
317