Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 241

-r importedFID devWWN
Examples To display the persistent proxy device configuration:
To persistently configure device WWN 00:11:22:33:44:55:66:77 to use slot f101h in fabric 5:
To remove device WWN 00:11:22:33:44:55:66:77 from its persistent slot in fabric 5:
See Also fcrPhyDevShow, fcrProxyDevShow, fcrXlateConfig, lsanZoneShow, switchShow
Fabric OS Command Reference Manual
53-1000436-01
"The specified slot already contains a WWN, overwrite? [y]" is displayed if the
specified slot already contains an entry. You are then prompted for overwrite
confirmation.
Removes the specified devWWN (format: XX:XX:XX:XX:XX:XX:XX:XX) from its
slot for the edge fabric specified by importedFID (1 through 128).
"WWN does not exist in any proxy device slot." is displayed if the WWN does
not exist in any slot for the specified edge fabric.
switch:admin> fcrproxyconfig
Imported FID
002
002
002
002
003
switch:admin> fcrproxyconfig -s 5 00:11:22:33:44:55:66:77 f101
switch:admin> fcrproxyconfig -r 5 00:11:22:33:44:55:66:77
WWN deleted from proxy device slot
Device WWN
50:05:07:65:05:84:08:d7
50:05:07:65:05:84:0a:7b
22:00:00:20:37:c3:11:71
22:00:00:20:37:c3:1a:8a
10:00:00:00:c9:2b:6a:2c
2
fcrProxyConfig
Slot
f001
f002
f001
f002
f001
209