Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 278

2
fportTest
-ports itemlist
-seed payload_pattern
-width pattern_width
-size pattern_size
Examples To run fportTest on a switch:
Diagnostics The following are possible error messages if failures are detected:
246
Specify the ports to test. If itemlist is omitted, the test is executed on all
online F_Ports in the specified slot. This operand is optional.
Specify the pattern of the test packets payload. Valid values are:
0 CSPAT (default)
1 BYTE_LFST
2 CHALF_SQ
3 QUAD_NOT
4 CQRT_SQ
5 CRPAT
6 RANDOM
All other values are modularized into one of these values.
Specify the width of the pattern that the user specified. Valid values are:
1 byte (default)
2 word
4 quad
This operand is optional.
Specify the number of words in the test packet payload. If pattern_size is
omitted, the default value is 512. This operand is optional.
switch:admin> fporttest -ports 1/0-1/15
Running fPortTest .......
Test Complete: "fporttest" Pass 10 of 10
Duration 0 hr, 0 min & 1 sec (0:0:0:127).
passed.
DATA
INIT
PORT_DIED
EPI1_STATUS_ERR
ERR_STAT
ERR_STATS
ERR_STATS_2LONG
ERR_STATS_BADEOF
ERR_STATS_BADOS
ERR_STATS_C3DISC
ERR_STATS_CRC
ERR_STATS_ENCIN
ERR_STATS_ENCOUT
ERR_STATS_TRUNC
ERR_STAT_2LONG
ERR_STAT_BADEOF
Fabric OS Command Reference Manual
53-1000436-01