Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 377

cost
If no operands are specified, the current link costs for all ports on the switch.
Examples To display the cost of a link and set that cost:
See Also interfaceShow, lsDbShow, topologyShow, uRouteShow, fcrRouterPortCost
Fabric OS Command Reference Manual
53-1000436-01
Specify the new cost of the link connected to the specified port number. If
cost is 0, this port will then revert to its default link cost. This operand is
optional. If omitted, this command displays the cost of the specified port.
switch:admin> linkcost
Slot Interface
--------------------------------------
2 0
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8
2 9
2 10
2 11 (E_PORT)
2 12
2 13
2 14
2 15
Type <CR> to continue, Q<CR> to stop:
switch:admin> linkcost 2/4 500
switch:admin> linkcost 2/4
Interface2/4
switch:admin> linkcost 2/4 0
switch:admin> linkcost 2/4
Interface2/4
Cost
500 (STATIC)
1000
500 (STATIC)
200 (STATIC)
1000
1000
1000
1000
1000
1000
1000
2000 (STATIC)
1000
1000
1000
1000
Cost 500 (STATIC)
Cost 1000
2
linkCost
345