Fcrbcastconfig - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual
Brocade fabric os command reference manual - supporting fabric os v5.3.0 (53-1000436-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
fcrbcastconfig
Display or set the broadcast frame forwarding option.
Synopsis
frcbcastconfig --show ,--enable <-f> <fabric id>, -disable <-f> <fabric id> --help
Description
Use this command to set the broadcast frame option to ON or OFF or to displaythe current
configuration. If no operands are specified, this command displays the current settings on the
switch.
Operands
This command takes the following operands:
-show
-enable -f fabric id
-disable -f fabric id
-f fabric id
--help
EXAMPLES
To display the current configuration of the switch.
SEE ALSO
bcastshow, portRouteShow
Fabric OS Command Reference Manual
53-1000436-01
Shows the current configuration on the switch.
Enables the frame forwarding option for the specified fabric ID.
Disables the frame forwarding option for the specified fabric ID
Specifies the fabric ID. Valid values are 1-128.
Displays the list of actions possible.
switch:admin> frcbcastconfig --show
Broadcast configuration is disabled for:
fid 2
fid 128
fid 33
2
fcrbcastconfig
193
Advertisement
Table of Contents
