Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 783

TABLE 1
Commands Exclusive to the Primary FCS (Continued)
Command
tsClockServer
wwn
zoneAdd
zoneCreate
zoneDelete
zoneObjectCopy
zoneObjectExpunge
zoneObjectRename
zoneRemove
Fabric OS Command Reference Manual
53-1000436-01
Notes
Can be run on all switches to view the NTP server's IP address. You can only modify
the NTP server's IP address on the primary FCS switch.
This command can be run on all switches to view the WWN. With security enabled the
WWN of a switch cannot be modified.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Commands Exclusive to the Primary FCS
4
751