Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 385

TABLE 17
Field
advertiser
incarn
length
chksum
linkCnt
flags
LinkId
out port
rem port
cost
costCnt
type
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operand:
domain
Examples To display the link state record for a switch:
Fabric OS Command Reference Manual
53-1000436-01
lsDbShow Display Fields (Continued)
Description
ID (domain number) of the switch that originated this LSR.
Incarnation number of this LSR.
Total length, in bytes, of this LSR. Includes header and link state
information for all links.
Checksum of total LSR, with exception of lsAge field.
Number of links in this LSR. Each link represents a neighbor in
NB_ST_FULL state.
Always 0.
ID of this link. It is the domain number of the switch on the other side of the
link.
Port number on the local switch.
Port number of the port on the other side of the link.
Cost of this link. The default cost for a 1 Gbit/sec link is 1,000.
Always 0.
Always 1.
Specify the domain number of the LSR to be displayed. This operand is
optional; if omitted, the entire link state database is displayed.
switch:admin> lsdbshow 1
Domain = 1 (self), Link State Database Entry pointer = 0x1004d430
lsrP = 0x10053d18
earlyAccLSRs = 0
ignoredLSRs = 0
lastIgnored = Never
installTime = Apr 02 22:25:30.159
lseFlags = 0xa
uOutIfsP[0] = 0x00000000
uOutIfsP[1] = 0x00000000
uPathCost = 0
uOldHopCount = 0
uHopsFromRoot = 0
mOutIfsP[0] = 0x00010000
mOutIfsP[1] = 0x00000000
parent = 0xb5
mPathCost = 0
mHopsFromRoot = 0
Link State Record:
Link State Record pointer = 0x10053d18
lsAge = 16
reserved = 0
type = 1
2
lsDbShow
353