Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 329

Operands This command has the following operands:
slotnumber
portnumber
When no slot number and port number are specified, this command displays the interface
information for all ports on the switch (including non-E_Ports).
Examples To display FSPF interface information:
(continued on next page)
Fabric OS Command Reference Manual
53-1000436-01
For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is optional; if omitted, the
interface information for all ports is displayed.
switch:user> interfaceshow 1/4
idbP = 0x1008b3d0
Interface 4 data structure:
nghbP = 0x1008c668
ifNo = 4
masterPort = 4 (self)
defaultCost = 500
cost = 500
delay = 1
lastScn = 16
lastScnTime = Apr 02 20:01:44.458
upCount = 2
lastUpTime = Apr 02 20:01:44.458
downCount = 1
lastDownTime = Apr 02 20:01:09.050
downReason = 2
iState = UP
Neighbor 4 data structure:
state = NB_ST_FULL
lastTransition = Apr 02 20:01:44.512
nghbCap = 0x0
nghbId = 100
idbNo = 4
remPort = 52
nflags = 0xf
initCount = 1
lastInit = Apr 02 20:01:44.460
firstHlo = Apr 02 20:01:44.473
nbstFull = Apr 02 20:01:44.512
delay = 1
lastScn = 16
&dbRetransList = 0x1008c6a0
&lsrRetransList = 0x1008c6c4
&lsrAckList = 0x1008c6e8
inactTID = 0x1008c768
helloTID = 0x1008c7a0
dbRtxTID = 0x1008c7d8
lsrRtxTID = 0x1008c848
inactTo = 80000
helloTo = 20000
2
interfaceShow
297