Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 261

Part Number
PID
Plant of Manufacture
Port
Port Status
Port Type
Fabric OS Command Reference Manual
53-1000436-01
0xe0 Vendor specific.
Byte BB
0x00 Unspecified class.
0x01 Direct access storage device, if it is an storage port; otherwise, not
channel-to-channel capable.
0x02 Magnetic tape, if it is an storage port; otherwise, a reserved field for
a channel port.
0x03 Input unit record, if it is an storage port; otherwise, a reserved field
for a channel port.
0x04 Output unit, if it is an storage port; otherwise, a reserved field for a
channel port
0x05 Reserved field for a channel port.
0x06 Controller, if it is an storage port; otherwise, a reserved field for a
channel port.
0x07 Terminal - Full screen if it is an storage port; otherwise, a reserved
field for a channel port.
0x08 Terminal - Line mode if it is an storage port; otherwise, an emulated
control unit support only.
0x09 Reserved.
0x10 Switch, if it is a switch device; otherwise, reserved.
0x0b-0xff Reserved.
Byte CC
0x00 If storage CU port has registered with the switch.
0xID CHIPID if channel port has registered with the switch.
0xPN If switch has registered with the channel, PN represents the FL port
number.
Displays the switch chassis part number.
Displays the 24-bit Fibre Channel port address in 0xDDAAPP format. DD is
Domain ID. AA is Area ID. PP is AL_PA ID.
Displays the manufacturer plant name or code.
Physical port number.
Displays the status of the port:
Link degraded but operational
Link not operational
Displays the port type:
U is unknown.
N is N_Port.
2
ficonShow
229