Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 536

2
portLogShow
sn
fcin
fcout
read
write
err
frame
nsRemQ
rscn
xalloc
xfree
xerr
xstate
payload
Port
Cmd
ioctl
Tx & Rx
scn
pstate
ctin
fc
f8
ctout
errlog
loopscn
OLP
LIP
LIM
BMP
OLD
TMO
Args
start
disable
504
Speed negotiation states
Incoming fibre channel information unit
Outgoing fibre channel information unit
Information unit header log from read operation
Information unit header log from write operation
Information unit header log of an fc error frame
FC frame payload
Interswitch name server query
RSCN
Allocate an exchange
Free an exchange
Exchange error
Exchange state
Frame payload
Displays the port number that logged the event.
Defined by the event. Displays a value defined by the event as follows:
I/O control command code
Frame payload size
New state (see state codes below)
New physical state (see pstate codes below)
The CT-subtype:
Simple Name Server
Alias Server.
Same as ctin above.
Error level (refer to errShow)
Current loop state during loop initialization, possible values are:
Offline (disconnected or nonparticipating)
FL_Port entered INITIALIZING or OPEN_INIT state
LISM completed, FL_Port became the loop master
Loop init completed, FL_Port in MONITORING state
Port transited to the OLD_PORT state
Loop init times out
Displays additional information about the event as follows:
Start type: 0 = enable ports, 100 = disable ports
State (refer to state codes next)
Fabric OS Command Reference Manual
53-1000436-01