Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 560

2
portShow
To display IP interfaces on a GbE port:
To display the connection parameter information on an FCIP tunnel on a GbE port and to show the
current DiffServ markings being used for data connection as well as control connection:
To display the connection information on an FCIP tunnel on a GbE port:
528
Rx_flushed: 0
Tx_unavail: 0
Free_buffer: 0
Overrun: 0
Suspended: 0
Parity_err: 0
2_parity_err: 0
CMI_bus_err: 0
Port part of other ADs: No
switch:admin> portshow ipif ge0
GE Port 0/ge0
Interface IP Address
----------------------------------------------------------
0 192.168.255.20
1 192.168.255.21
2 192.168.255.22
3 192.168.255.23
4 192.168.255.28
5 192.168.255.26
6 192.168.255.27
switch:admin> portshow fciptunnel ge0 all
Port: ge0
-------------------------------------------
Tunnel ID 7
Remote IP Addr 192.168.255.17
Local IP Addr 192.168.255.107
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:37:00:20
Compression off
Fastwrite off
Tape Pipelining off
Uncommitted bandwidth, minimum of 1000 Kbps (0.001000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
DSCP Marking (Control): 10, DSCP Marking (Data): 50
Status : Inactive
switch: admin> portcfgshow ge0
Persistent Disable:
Mode:
Ipif configuration:
Interface IP Address
----------------------------------------------------------
0 192.168.255.107 255.255.255.0
Invalid_crc: 0
Delim_err: 0
Address_err: 1
Lr_in: 2
Lr_out: 2
Ols_in: 0
Ols_out: 2
NetMask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
OFF
FCIP
NetMask
MTU
1500
1500
1500
1500
1500
1500
1500
MTU
1500
Fabric OS Command Reference Manual
53-1000436-01