Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 462

2
perfSetPortEEMask
TxSIDMsk
00
ff
TxDIDMsk
RxSIDMsk
RxDIDMsk
Examples To set the overall mask for end-to-end monitors on a port:
See Also perfAddEEMonitor, perfShowEEMonitor
430
Specify the transmitting source ID mask in dd:aa:pp format, with quotation
marks, , where dd is the domain ID mask, aa is the area ID mask, and pp is
AL_PA ID mask. For example, "00:ff:00" uses only the Area ID to trigger the EE
monitor.
Specify the following values to turn on or off a specific field:
Specifies that the field does not trigger EE monitors.
Specifies that the field does triggers EE monitors.
Specify the transmtting Destination ID mask, in quotation marks, in dd:aa:pp
format.
Specify the recieving Source ID mask, in quotation marks, in dd:aa:pp format.
Specify the destination ID mask, in quotation marks, in dd:aa:pp format
switch:admin> perfsetporteemask 1/6 "00:00:00" "ff:ff:ff" "00:ff:ff" "ff:00:00"
Changing EE mask for this port will cause ALL EE monitors on this port to be
deleted.
continue? (yes, y, no, n): [no] y
The EE mask on port 6 is set and EE Monitors on this port are deleted
Fabric OS Command Reference Manual
53-1000436-01
.