Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 563

stat64_rateRxPeakByte
stat64_PRJTFrames Number of P_RJT frames transmitted.
stat64_PBSYFrames Number of P_BSY transmitted.
stat64_inputBuffersFull
stat64_rxClass1Frames
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber
portnumber
Examples To display the 64-bit hardware statistics for a port:
(continued on next page)
Fabric OS Command Reference Manual
53-1000436-01
Rx peak Byte rate (Bytes/sec).
Occasions on which input buffers are full.
Class 1 frames received.
For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
Specify a port number to be displayed, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
switch:user> portstats64show 4/15
stat64_wtx 0
316
stat64_wrx 0
1486
stat64_ftx 0
69
stat64_frx 0
73
stat64_c2_frx 0
0
stat64_c3_frx 0
37
stat64_lc_rx 0
8
stat64_mc_rx 0
0
stat64_mc_to 0
0
stat64_mc_tx 0
0
tim64_rdy_pri 0
60438254
tim64_txcrd_z 0
2
er64_enc_in 0
0
er64_crc 0
0
er64_trunc 0
0
er64_toolong 0
0
er_bad_eof 0
0
top_int : 4-byte words transmitted
bottom_int : 4-byte words transmitted
top_int : 4-byte words received
bottom_int : 4-byte words receive
top_int : Frames transmitted
bottom_int : Frames transmitted
top_int : Frames received
bottom_int : Frames received
top_int : Class 2 frames received
bottom_int : Class 2 frames received
top_int : Class 3 frames received
bottom_int : Class 3 frames received
top_int : Link control frames received
bottom_int : Link control frames received
top_int : Multicast frames received
bottom_int : Multicast frames received
top_int : Multicast timeouts
bottom_int : Multicast timeouts
top_int : Multicast frames transmitted
bottom_int : Multicast frames transmitted
top_int : Time R_RDY high priority
bottom_int : Time R_RDY high priority
top_int : Time BB_credit zero
bottom_int : Time BB_credit zero
top_int : Encoding errors inside of frames
bottom_int : Encoding errors inside of frames
top_int : Frames with CRC errors
bottom_int : Frames with CRC errors
top_int : Frames shorter than minimum
bottom_int : Frames shorter than minimum
top_int : Frames longer than maximum
bottom_int : Frames longer than maximum
top_int : Frames with bad end-of-frame
bottom_int : Frames with bad end-of-frame
2
portStats64Show
531