Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 694

2
supportShow
portShow fciptunnel $1/ge$k all
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber/portnumber1-portnumber2
lines
Examples To display switch information for debugging:
See Also supportFtp, supportSave, supportShowCfgDisable, supportShowCfgEnable, supportShowCfgShow,
traceDump, traceTrig
662
Specify the range of ports to display. If the
slotnumber/portnumber parameter is omitted, all ports in the switch display
in the per-port outputs. The slotnumber must be provided when specifying a
range of ports on multi-bladed products.
Specifies the number of lines of portLogDump output to display. If this
parameter used, the slotnumber/portnumber parameter is required.
switch:admin> supportshow 1/1-3
supportshow groups enabled: system
version:
Kernel: 2.4.19
Fabric OS: v4.1.0
Made on: Fri Jan 10 01:06:10 2003
Flash: Thu Jan 17 00:06:52 2003
BootProm: 3.2.1
uptime:
10:49am up 3:25,
switchshow:
switchName: Ulysses2
switchType: 10.1
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:60:69:80:03:0c
zoning: OFF
switchBeacon: OFF
blade1 Beacon: OFF
blade2 Beacon: OFF
blade4 Beacon: OFF
Area Slot Port Media Speed State
=====================================
0 1 0 id
1 1 1 id
2 1 2 id
3 1 3 id
4 1 4 id
5 1 5 id
6 1 6 id
(output truncated)
1 user, load average: 1.55, 1.20, 1.11
N2 Online Loopback->Slot
N2 Online Loopback->Slot
N2 Online Loopback->Slot
N2 Online Loopback->Slot
N2 Online Loopback->Slot
N2 Online Loopback->Slot
N2 Online Loopback->Slot
1 Port 0
1 Port 1
1 Port 2
1 Port 3
1 Port 4
1 Port 5
1 Port 6
Fabric OS Command Reference Manual
53-1000436-01