Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 185

0x00000800
0x00001000
0x00002000
0x00004000
0x00008000
0x00010000
0x00020000
0x00040000
0x00080000
0x00100000
0x00200000
0x00400000
0x00800000
0x01000000
0x02000000
0x040000000
0x080000000
0x100000000
0x200000000
nbrWWN
nbrPort
lr_tid
red_ports
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
slotnumber
portnumber
Examples To display fabric port information:
Fabric OS Command Reference Manual
53-1000436-01
Zoning has completed
Segmented by Platform Management
Segmented due to no license
Segmented due to E_Port disabling
DIA already sent for that port
RDI already sent
Port is true T port
Port received an ELP
Port received an ELP RJT
LR pending due to ELP RJT rcv
Received a DIA on this port
Port is the EMT Initiator
Security violation
Security incompatibility
Rcv a DIA ACC
Port is security authenticating
ECP RJT or retires exceeded
Segmented due to duplicated WWN
Segmented due to E_Port isolation
Neighboring switch's WWN
Neighboring switch's port
Link reset timer identifier and current state.
All E_Ports that are connected to the same neighboring switch
For bladed systems only, specifies the slot number of the port to display,
followed by a slash (/).
Specifies the port number to display, relative to its slot for bladed systems.
Use switchShow to list valid ports.
switch:admin> fabportshow 4/14
Fabric Port Information:
========================
Port: 62
State: P3
List: 0x10068418
List Count: 0
2
fabPortShow
153