Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 281

--show
Examples To display the status of the features:
To disable the FC Routing service:
To enable the FC Routing service:
To enable the iSCSI service:
To disable the iSCSI service:
See Also fcrConfigure, iscsiCfg, iscsiPortCfg, isnscCfg, switchShow
Fabric OS Command Reference Manual
53-1000436-01
"FC Routing service is already disabled" - This means that the FC Routing
service is already disabled.
Use switchShow to display the current state of the FC Routing service.
iSCSI
be run while the switch state is "online".
iSNSC The iSNSC service will be disabled on this switch. This command can
be run while the switch state is "online".
Displays the current operating status of features on the switch.
The features shown here may not be supported on all platforms. If you
attempt to enable a feature that is not supported on your platform, an error
message stating "Command not supported on this platform" is displayed.
switch:admin> fosconfig --show
FC Routing service:
iSCSI service:
iSNS Client service:
switch:admin> fosconfig --disable fcr
FC Routing service is disabled
switch:admin> fosconfig --enable fcr
FC Routing service is enabled
switch:admin> fosconfig --enable iscsi
iSCSI service is enabled
switch:admin> fosconfig --disable iscsi
iSCSI service is disabled
The iSCSI service will be disabled on this switch. This command can
enabled
enabled
disabled
2
fosConfig
249