Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Command Reference Manual page 262

2
ficonShow
Protocol
Registered Node WWN
Registered Port WWN
Sequence Number
Serial Number
Switch node WWN
Switch Port WWN
Switch WWN
Tag
TS Format
Time Stamp
Type
Type Number
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands This command has the following operands:
database
fabric
Examples To display the local RNID database:
230
NL is NL_Port.
Displays whether the traffic is using FICON or FCP.
Displays the device's node World Wide Name associated with the device HBA.
Displays the device's channel or storage CU port World Wide Name
associated with the device HBA.
Displays the sequence number of the self describing node.
Displays the switch serial number.
Displays the switch node World Wide Name.
Displays the switch port World Wide Name.
Displays the switch WWN.
Displays the physical identifier for the self-describing node interface.
Displays the Time Server format.
Displays the timestamp, expressed in date format.
Same as Port Type.
Displays the type number of the self describing node. It also describes the
machine type.
Specify the database to display. Valid values are:
RNID
LIRR
SwitchRNID
RLIR
ILIR
This operand is required.
Specify fabric to display both local and remote information; if
omitted, only members of the named database that are local to
the switch on which the command is issued displays.
switch:admin> ficonshow RNID
{
{Fmt Type PID Registered Port WWN
0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca 0x10
0x200110
Type number:
Model number:
Manufacturer:
Plant of Manufacture: 02
Registered
002064
101
IBM
Node WWN flag Parm
Fabric OS Command Reference Manual
53-1000436-01