Figure 35. Attaching The Brackets To The Optical Drive; Figure 36. Installing The Optical Drive Into The Server System - Intel SR1630BC - Server System - 0 MB RAM Service Manual

Figure 35. Attaching the Brackets to the Optical Drive

3. Slide the optical drive assembly in through the front of the chassis, as shown by
letter "A in the following figure. Secure the optical drive to the chassis with a screw
(see letter "B"). Route the power cable through the clip in front of the system fans
and connect it to the power connector on the optical drive (see letter "C"). Connect
the data cable to the optical drive and to the IDE connector on the server
board.When the black drive carrier lever begins to close by itself, push on it to lock
the drive assembly into place.

Figure 36. Installing the Optical Drive into the Server System

®
Intel Server System SR1630BC Service Guide 43