Summary of Contents for Intel SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache Memory
Page 1
® Intel Server Chassis SR1500 ® Intel Server System SR1500AL Technical Product Specification Intel order number D31981-008 Revision 1.4 October 2007 Enterprise Platforms and Services Marketing...
Page 2
Revision History Intel® Server System SR1500AL TPS Revision History Date Revision Modifications Number June 2006 Initial release. January 2007 Replaced pin J6B2 with J4B3 in table 27. Updated regulatory section. June 2007 Corrected Wattage rating on page 9. Minor formatting and editing changes.
Page 3
Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
Table of Contents Intel® Server System SR1500AL Table of Contents 1. Product Overview......................... 1 Chassis Views ......................1 Chassis Dimensions ....................2 System Components ....................2 System Boards ......................3 Control Panel Options....................4 Hard Drive and Peripheral Bays ................6 Power Sub-system....................
Page 5
Intel® Server System SR1500AL Table of Contents 5.2.1 Hot-swap Hard Disk Drive Trays ................22 5.2.2 Drive Blanks......................22 Hot-Swap Backplane Support................23 5.3.1 Feature set:......................24 5.3.2 Vitesse* VSC410 Enclosure Management Controller..........28 5.3.3 LSI* SAS1064E 3.0 Gbit/s Serial Attached SCSI Controller........28 5.3.4...
Page 6
Table of Contents Intel® Server System SR1500AL 10.6.5 Japan EMC Compatibility ..................62 10.6.6 BSMI (Taiwan) ....................... 63 10.6.7 RRL (Korea)......................63 10.6.8 CNCA (CCC-China) ....................63 10.7 Product Ecology Compliance................. 64 10.8 Other Markings ...................... 66 Appendix A: Integration and Usage Tips................LXVIII Appendix B: POST Code Diagnostic LED Decoder ..............
Page 7
List of Figures List of Figures ® Figure 1. Front View with Bezel – Showing the Intel Local Control Panel Option ....... 1 Figure 2. Front View without Bezel – Showing the Standard Control Panel Option ..... 1 Figure 3. Rear Chassis View ......................1 Figure 4.
Page 8
List of Figures Intel® Server System SR1500AL ® Figure 36. Intel Server Board S5000PAL .................. 54 ® Figure 37. Intel Server Board S5000PAL Components............. 56 Figure 39. Diagnostic LED Placement Diagram ................II viii Revision 1.4 Intel order number D31981-008...
Page 9
Intel® Server System SR1500AL List of Tables List of Tables Table 1. Chassis Dimensions ....................... 2 Table 2. Cable Harness Definition ..................... 10 Table 3. P1 – Main Power Connector Pin-out................10 Table 4. P2 – Processor Power Connector Pin-out ..............11 Table 5.
Page 10
List of Tables Intel® Server System SR1500AL Table 36. Control Panel LED Operation ..................46 Table 38. System Environmental Limits Summary ..............57 Table 39. Product Safety & Electromagnetic (EMC) Compliance ..........60 Table 40: POST Progress Code LED Example ................II Table 41.
Page 11
Intel® Server System SR1500AL List of Tables < This page intentionally left blank > Revision 1.4 Intel order number D31981-008...
® The Intel Server Chassis SR1500 is a 1U server chassis that is designed to support the Intel Server Board S5000PAL/S5000XAL. The server board and the chassis have features that are designed to support the high-density server market. This chapter provides a high-level overview of the chassis features.
Product Overview Intel® Server System SR1500AL TPS Chassis Dimensions Table 1. Chassis Dimensions Height 43.25 mm 1.703” Width without rails 430 mm 16.930” Width with rails 451.3 mm 17.77” Depth without CMA 692 mm 27.25” Depth with CMA 838.2 mm 33.0”...
Intel® Server System SR1500AL TPS Product Overview The I/O connector locations on the back of the chassis are pre-cut, so the use of an I/O shield is not required. The supplied EMI gasket must be installed to maintain Electromagnetic Interference (EMI) compliance levels.
Product Overview Intel® Server System SR1500AL TPS • Control Panel – A PCB providing system status and control functionality features. Two control panel options are available for this system o Standard Control Panel (Product Code – AXXRACKFP) ® o Intel Local Control Panel with LCD support (Product Code –...
Intel® Server System SR1500AL TPS Product Overview The standard control panel supports several push buttons and status LEDs, along with USB and video ports to centralize system control, monitoring, and accessibility to within a common compact design. The following diagram overviews the layout and functions of the control panel.
• Over-temperature protection circuitry • Over-voltage protection circuitry ® ® With the addition of an Intel Remote Management Module and Intel System Management Software, the power subsystem is capable of supporting several system management features including: • Remote Power On/Off •...
Intel® Server System SR1500AL TPS Product Overview The power supply operates within the following voltage ranges and ratings PARAMETER RATED Start up Power Max Rated Max Input Input AC AC Current Current Voltage (110) 90 V 100-127 V 140 V...
Product Overview Intel® Server System SR1500AL TPS 1.11 Front Bezels The optional front bezel is made of molded plastic and uses a snap-on design. When installed, its design allows for maximum airflow to maintain system cooling requirements. Separate front bezels are available to support systems that use either a standard control panel (Product Code ®...
This chapter provides basic technical details to the design and operation of the power supply. ® For more in-depth information, refer to the Intel Server Chassis SR1500 AC Power Supply Specification.
Power Sub-System Intel® Server System SR1500AL TPS 2.2 Output Connectors The power supply has a cable harness with four power connectors used to power various platform sub-systems. The following table defines each power connector Table 2. Cable Harness Definition Label...
Intel® Server System SR1500AL TPS Power Sub-System P2 – Processor Power Connector Connector housing: 8-Pin Molex 39-01-2085 or equivalent Contact: Molex, Mini-Fit Jr, HCS, 44476-1111 or equivalent Table 4. P2 – Processor Power Connector Pin-out SIGNAL 18 AWG COLOR SIGNAL...
Power Sub-System Intel® Server System SR1500AL TPS AC Input Voltage Requirement The power supply must operate within all specified limits over the following input voltage range, shown in below table. Harmonic distortion of up to 10% THD must not cause the power supply to go out of specified limits.
Intel® Server System SR1500AL TPS Power Sub-System 2.5.2 Over-voltage Protection (OVP) The power supply over-voltage protection shall be locally sensed. The power supply shall shutdown and latch off after an over-voltage condition occurs. This latch shall be cleared by toggling the PSON signal or by an AC power interruption.
Power Sub-System Intel® Server System SR1500AL TPS AC Power Cord Specification Requirements The AC power cord used must meet the following specification requirements: Cable Type Wire Size 16 AWG Temperature Rating 105º C Amperage Rating Voltage Rating 125V Revision 1.4...
Intel® Server System SR1500AL TPS Cooling Sub-System Cooling Sub-System The cooling sub-system is compromised of five 40x40x56mm dual rotor fans, two 40x40x28mm power supply fans, a CPU air duct, and a PS / Electronics Bay Isolation Air Baffle. These components are used to provide the necessary cooling and airflow to the system. A fan on the processor heat sink is not necessary in this chassis.
Cooling Sub-System Intel® Server System SR1500AL TPS The system fan module has been designed for ease of use and has support for several management features that can be utilized by the server board management system. • Each fan is designed for tool-less insertion to or removal from the fan module housing.
Intel® Server System SR1500AL TPS Cooling Sub-System An air baffle is used to isolate airflow of the two power supply fans from that of the system fan module. The baffle is mounted into three stand-offs with one end fitting under the back edge of the hard drive bay.
Cooling Sub-System Intel® Server System SR1500AL TPS Drive Bay Population Hard drive bays must be populated in order to maintain system thermals. Hard drive trays, both hot-swap and cabled drives, must either have a hard drive or drive blank installed in them.
Variable Speed System Fans System BIOS BMC Firmware Sensor Data Records as loaded by the FRUSDR Utility FBDIMM type Processor type ® For additional details on platform control, please see the Intel S5000 Server Board Family Datasheet Revision 1.4 Intel order number D31981-008...
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support The server chassis provides three hard drive bays and one slimline peripheral drive bay at the front of the chassis. The hard drive bays are designed to support both SAS and SATA hot-swap drives depending on the backplane and controller configuration.
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support TP02169 Figure 18. View of Slimline Drive Bay 5.1.2 Optical Drive Support The chassis has support for a slimline IDE optical drive. The drive is mounted onto a tool-less drive tray and is connected to an interposer card attached to the tray. The drive assembly is then inserted in to the slimline drive bay.
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS Hard Disk Drive Support The chassis can support up to three 3.5” x 1” hot-swap SAS or SATA hard disk drives. The drives are mounted to hot-swap drive trays for easy insertion to or extraction from the drive bay.
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support TP02104 Figure 20. Drive Tray with Drive Blank Hot-Swap Backplane Support The chassis can support either an active SAS (Product Code – ASR1500SASBP) or a passive SAS/SATA backplane (Product Code – ASR1500PASBP). The backplanes provide the platform support for peripheral drives and hot-swap SAS or SATA hard drives.
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS 5.3.1 Feature set: The backplanes support the following features and functions. • Vitesse* VSC410 enclosure management controller − Integrated v3000 32 bit RISC microprocessor core − External non-volatile Flash ROM −...
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support The following diagrams show the layout of major components and connectors for each backplane. TP02171 Figure 21. Hot-swap Passive SAS/SATA Backplane Layout Backplane Power Fan 3 Power USB Floppy Connector...
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS TP02172 Figure 22. Active SAS Backplane Layout Backplane Power Fan 2 Power USB Floppy Connector Front Panel Connector SW RAID Activation Key Fan 1 Power Fan 5 Power Screw Bridge Board Connector...
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support The following figures show the functional blocks for each backplane. Passive Backplane Activity Signals 7-Pin Drive Control 17-Pin SAS/SATA HDD Status Connectors x3 HDD Connectors x3 LED x3 I2C and GPIO...
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS 5.3.2 Vitesse* VSC410 Enclosure Management Controller Both the active and passive backplanes support enclosure management using a Vitesse* VSC410 management controller. The VSC410 drives the hard drive activity/fault LED, hard drive present signal, and controls hard drive power up during system power on.
Page 41
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support lower power requirements when compared to parallel SCSI. SAS controllers leverage an electrical and physical connection interface that is compatible with Serial ATA technology. ® The LSISAS1064E supports the Intel Embedded RAID Technology II solution, which is a highly integrated, low-cost RAID implementation.
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS 5.3.4 LED Support The backplanes support an activity/fault LED for each of the hard drive connectors. The LED will illuminate green for activity or amber for a drive fault. The green activity LED is driven by the SAS/SATA hard disk drive directly.
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support 5.3.5 Backplane Connector Definitions The backplanes include several different connectors. This section defines the purpose and pin- out associated with each. 5.3.5.1 Power Connector (Backplane to Power Supply Harness) The backplane provides power to the three hard drive bays and the slimline drive bay. An 8-pin power cable is routed from the power supply and plugs into a 2x4 shrouded plastic PC power connector on the backplane.
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS The following table provides the pin-out for the 120-pin connector. Table 19. Bridge Board Connector Pin-out (J5A1) SIGNAL NAME SIGNAL NAME SMB_SENSOR_3V3SB_CLK_BUF PE1_ESB_TX_DN3 SMB_SENSOR_3V3SB_DAT_BUF PE1_ESB_TX_DP3 FM_BRIDGE_PRSNT_N PE_WAKE_N PE1_ESB_RX_DN_C3 PE1_ESB_RX_DP_C3 PE1_ESB_TX_DN2...
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support SIGNAL NAME SIGNAL NAME V_IO_RED_CONN_FP FM_SIO_TEMP_SENSOR LED_FAN3_FAULT LED_FAN6_FAULT LED_FAN2_FAULT LED_FAN5_FAULT LED_FAN1_FAULT LED_FAN4_FAULT FAN_PWM_CPU1 FAN_PWM3 FAN_PWM_CPU2 PCI_FAN_TACH10 PCI_FAN_TACH9 FAN_TACH8 FAN_TACH7 FAN_TACH6 FAN_TACH5 FAN_TACH4_H7 FAN_TACH3_H7 FAN_TACH2_H7 FAN_TACH1_H7 5.3.5.3 Control Panel I/O Interface Connector (Backplane to Control Panel) The backplanes provide a pathway for control panel I/O signals from the bridge board connector to the control panel interface connector.
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS 5.3.5.4 Control Panel USB Interface Connector (Backplane to Control Panel) The backplanes provide a pathway for control panel USB signals from the bridge board connector to the control panel USB interface connector. The pin-out for the 10-pin control panel USB connector is shown in the following table.
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support 5.3.5.6 SATA/SAS Drive Control Connectors (Passive Backplane Only) The passive backplane includes three drive control connectors. These are used to attach SATA/SAS cables from the backplane to either the SATA ports on the server board, or to SAS/SATA ports from an add-in card.
Peripheral and Hard Drive Support Intel® Server System SR1500AL TPS 5.3.5.8 System Fan Connectors The backplanes provides a pathway for signals from the server board to monitor and control five system fans. A 1x10 mini connector is provided for each of the fans. The pin-out for each connector is provided in the following table.
Intel® Server System SR1500AL TPS Peripheral and Hard Drive Support 5.3.5.9 System Management Connectors The backplanes provide connectors to interface with system management buses. The following tables define the pin-out for each of these connectors. Table 26. IPMB Connector Pin-out (J1C1)
Standard Control Panel Intel® Server System SR1500AL TPS Standard Control Panel The standard control panel (Product Code – AXXRACKFP) supports several push buttons and status LEDs, along with USB and video ports to centralize system control, monitoring, and accessibility to within a common compact design.
Intel® Server System SR1500AL TPS Standard Control Panel Control Panel Buttons The standard control panel assembly houses several system control buttons. Each of their functions is listed in the table below. TP02178 Figure 27. Control Panel Buttons Table 28. Control Button and Intrusion Switch Functions...
Standard Control Panel Intel® Server System SR1500AL TPS The following table identifies each LED and describes their functionality. Table 29. Control Panel LED Functions Color State Description Green NIC Link NIC1 / NIC2 Activity Green Blink NIC Activity Green Legacy power on / ACPI S0 state...
Intel® Server System SR1500AL TPS Standard Control Panel 6.2.2 System Status LED Table 31. Control Panel LED Operation Color State Criticality Description Not ready AC power off Green/ Alternating Not ready Pre DC Power On – 15-20 second BMC Initialization when AC is...
Standard Control Panel Intel® Server System SR1500AL TPS 6.2.3 Drive Activity LED The drive activity LED on the front panel indicates drive activity from the onboard hard disk ® controllers. The Intel Server Board S5000PAL also provides a header giving access to this LED for add-in controllers.
Page 55
Intel® Server System SR1500AL TPS Standard Control Panel If a monitor is connected to the front panel video connector, the rear video port on the server board will be disabled and the front panel video will be enabled. The video source is the same for both connectors and is switched between the two, with the control panel having priority over the rear video.
Intel® Local Control Panel Intel® Server System SR1500AL TPS ® Intel Local Control Panel ® The Intel Local Control Panel (Product Code – AXXLCPRACK) utilizes a combination of control buttons, LEDs, and LCD display to provide system accessibility, monitoring, and control functions.
Intel® Server System SR1500AL TPS Intel® Local Control Panel LED Functionality The following table identifies each LED and describes their functionality. Table 34. Control Panel LED Functions Color State Description Green NIC Link NIC1 / NIC2 Activity Green Blink NIC Activity...
Intel® Local Control Panel Intel® Server System SR1500AL TPS 7.1.2 System Status LED Table 36. Control Panel LED Operation Color State Criticality Description Not ready AC power off Green/ Alternating Not ready Pre DC Power On – 15-20 second BMC Initialization when AC is...
Intel® Server System SR1500AL TPS Intel® Local Control Panel 7.1.3 Drive Activity LED The drive activity LED on the front panel indicates drive activity from the onboard hard disk ® controllers. The Intel Server Board S5000PAL also provides a header giving access to this LED for add-in controllers.
PCI Riser Cards and Assembly Intel® Server System SR1500AL TPS PCI Riser Cards and Assembly ® The Intel Server Board S5000PAL provides two PCI riser slots, one supporting a low profile add-in card riser, and the other used for full height add-in card risers. The riser cards for these slots are not interchangeable due to their orientation on the board and connector differences.
Intel® Server System SR1500AL TPS PCI Riser Cards and Assembly TP02187 Figure 32. PCI Riser Card Assembly – LP View Riser Card Options There are three different riser card options offered for use in the server chassis. • Low profile PCI Express* (Product Code – ASR15XXLPRIS)– capable of supporting a single x8 PCI Express add-in card •...
Intel® Server System SR1500AL TPS PCI Riser Cards and Assembly R1.50 5.00 [0.197] [0.1] Ø 9.00 Ø 4.60 [0.354] [0.181] Pad Side 1 & 2 Detail A Scale 2:1 Scale 1:2 See Detail A Side 2 Comp No Trace 32.51 [1.280] 30.84 [1.214]...
PCI Riser Cards and Assembly Intel® Server System SR1500AL TPS R1.50 5.00 [0.197] [0.1] Ø 4.60 [0.181] Pad Side 1 & 2 Detail A Ø 9.00 Scale 2:1 [0.354] Scale 1:2 See Detail A Side 2 Comp No Trace 32.51 [1.280] 28.43 [1.119]...
Intel 5000P Memory Controller Hub ® Intel ESB2-E I/O Controller ® Note: Intel will make available an OEM SKU of this server board using the Intel 5000X Memory Controller Hub On-board External connections: Connectors/Headers • Stacked PS/2* ports for keyboard and mouse •...
Page 66
Supported Intel® Server Boards Intel® Server System SR1500AL TPS ® System Management Support for Intel System Management Software ® Figure 36. Intel Server Board S5000PAL Revision 1.4 Intel order number D31981-008...
Page 67
Intel® Server System SR1500AL TPS Supported Intel® Server Boards V U S TP02071 Revision 1.4 Intel order number D31981-008...
Server Board S5000PAL Components 9.1.1 Processor Support ® ® The server system supports one or two Dual-Core Intel Xeon processors 5000 sequence, with system bus speeds of 667 MHz, 1066 MHz, and 1333 MHz, and core frequencies starting at ®...
Vibration, unpackaged 5 Hz to 500 Hz, 2.20 g RMS random Shock, operating Half sine, 2 g peak, 11 mSec +/-15kV except I/O port +/-8KV per Intel Environmental test specification System Cooling 2901 BTU/hour Requirement in BTU/Hr 10.2 Serviceability and Availability The system is designed to be serviced by qualified technical personnel only.
Environmental and Regulatory Specifications Intel® Server System SR1500AL TPS 10.3 Replacing the Back up Battery The lithium battery on the server board powers the real time clock (RTC) for up to 10 years in the absence of power. When the battery starts to weaken, it loses voltage, and the server settings stored in CMOS RAM in the RTC (for example, the date and time) may be wrong.
URL: http://channel.intel.com/go/serverbuilder If you do not have access to Intel’s Web address, please contact your local Intel representative. Server chassis (base chassis is provided with power supply and fans) – UL listed. Server board – you must use an Intel server board – UL recognized.
Page 72
Environmental and Regulatory Specifications Intel® Server System SR1500AL TPS Table 38. Product Safety & Electromagnetic (EMC) Compliance Compliance Regional Compliance Compliance Reference Marking Example Description Reference Australia / New Zealand AS/NZS 3548 (Emissions) N232 Argentina IRAM Certification (Safety) Belarus Belarus Certification...
Environmental and Regulatory Specifications Intel® Server System SR1500AL TPS All cables used to connect to peripherals must be shielded and grounded. Operation with cables, connected to peripherals that are not shielded and grounded may result in interference to radio and TV reception.
English translation of the notice above: 1. Type of Equipment (Model Name): On License and Product 2. Certification No.: On RRL certificate. Obtain certificate from local Intel representative 3. Name of Certification Recipient: Intel Corporation 4. Date of Manufacturer: Refer to date code on product 5.
Environmental and Regulatory Specifications Intel® Server System SR1500AL TPS 10.7 Product Ecology Compliance Intel has a system in place to restrict the use of banned substances in accordance with world wide product ecology regulatory requirements. The following is Intel’s product ecology compliance criteria.
Page 77
German Green Dot Applied to Retail Packaging Only for Boxed Boards Intel Internal All materials, parts and subassemblies must not Specification contain restricted materials as defined in Intel’s Environmental Product Content Specification of None Required Suppliers and Outsourced Manufacturers – http://supplier.intel.com/ehs/environmental.htm International ISO11469 - Plastic parts weighing >25gm are...
Environmental and Regulatory Specifications Intel® Server System SR1500AL TPS 10.8 Other Markings Compliance Compliance Reference Compliance Reference Description Marking Example Stand-by Power 60950 Safety Requirement Applied to product is stand-by power switch is used. English: Multiple Power Cords 60950 Safety Requirement...
Page 79
Intel® Server System SR1500AL TPS Environmental and Regulatory Specifications This page intentionally left blank Revision 1.4 Intel order number D31981-008...
Intel® Server System SR1500AL TPS Appendix A: Integration and Usage Tips ® This section provides a list of useful information that is unique to the Intel Server Chassis ® SR1500 and should be kept in mind while integrating and configuring your Intel Server Board S5000PAL.
Appendix B: POST Code Diagnostic LED Decoder Intel® Server System SR1500AL TPS Appendix B: POST Code Diagnostic LED Decoder During the system boot process, BIOS executes a number of platform configuration processes, each of which is assigned a specific hex POST code number. As each configuration routine is started, BIOS will display the given POST code to the POST Code Diagnostic LEDs found on the back edge of the server board.
Page 82
Intel® Server System SR1500AL TPS Appendix B: POST Code Diagnostic LED Decoder Table 40. Diagnostic LED POST Code Decoder Diagnostic LED Decoder Description Checkpoint G=Green, R=Red, A=Amber Host Processor 0x10h Power-on initialization of the host processor (bootstrap processor) 0x11h Host processor cache initialization (including AP)
Page 83
Appendix B: POST Code Diagnostic LED Decoder Intel® Server System SR1500AL TPS Diagnostic LED Decoder Description Checkpoint G=Green, R=Red, A=Amber 0x92h Detecting the presence of the keyboard 0x93h Enabling the keyboard 0x94h Clearing keyboard input buffer 0x95h Instructing keyboard controller to run Self Test (PS2 only)
Page 84
Intel® Server System SR1500AL TPS Appendix B: POST Code Diagnostic LED Decoder Diagnostic LED Decoder Description Checkpoint G=Green, R=Red, A=Amber 0xE8h Checking password 0xE9h Entering BIOS setup 0xEAh Flash Update 0xEEh Calling Int 19. One beep unless silent boot is enabled.
The BMC may generate beep codes upon detection of failure conditions. Beep codes are sounded each time the problem is discovered, such as on each power-up attempt, but are not ® sounded continuously. Codes that are common across all Intel Server Boards and Systems ®...
Intel® Server System SR1500AL TPS Glossary Glossary Word / Acronym Definition Australian Communication Authority ANSI American National Standards Institute Baseboard Management Controller CMOS Complementary Metal Oxide Silicon DC-to-DC Emergency Management Port Front Panel Fault Resilient Boot Field Replaceable Unit Liquid Crystal Display...
Reference Documents Intel® Server System SR1500AL TPS Reference Documents See the following documents for additional information: ® o Intel Server Board S5000PAL Technical Product Specification ® o Intel 5000 Series Chipsets Server Board Family Datasheet ® o Intel Server Chassis SR1500 AC Power Supply Module Specification ®...
Need help?
Do you have a question about the SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache Memory and is the answer not in the manual?
Questions and answers