Removing The Raid Battery Backup Unit; Figure 64. Installing The Raid Battery Backup Unit - Intel SR1625UR - Server System - 0 MB RAM Service Manual

6. Insert the RAID battery backup unit into the server system making sure the hooks
on the underside of the RAID BBU aligns with the matching chassis tabs and slide
towards the power supply until it locks into place (see letter "C" in
7. Connect the cable from the rear of the RAID battery backup unit to the midplane
board (see letter "D" in
8. Install the power distribution board cover. For instructions, see
Power Distribution Module" on page
9. Install the processor air duct. For instructions, see
Duct" on page
10. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page

Removing the RAID Battery Backup Unit

To remove the RAID battery backup unit, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Remove the power distribution board cover. For instructions, see
Power Distribution Module" on page
4. Remove the cable from the rear of the RAID battery backup unit and the midplane
board (see letter "A" in
5. Slide the RAID battery backup unit forward and lift from the server system (see
letter "B" in
®
Intel Server System SR1625UR Service Guide
Figure
A
B

Figure 64. Installing the RAID Battery Backup Unit

49.
43.
48.
Figure
Figure 65).
64).
C
84.
"Installing the Processor Air
44.
"Removing the PCI Riser
"Removing the Processor Air
84.
65).
Figure 64).
D
TP02257
"Replacing the
"Replacing the
77