Removing A Pci Add-In Card; Figure 31. Installing An Add-In Card - Intel SR1625UR - Server System - 0 MB RAM Service Manual

2. Remove the filler panel from the selected add-in card slot (see letter "A" in
Figure
3. Remove the screw (see letter "B" in
4. Insert add-in card until it seats in riser card connector (see letter "C" in
5. Secure the add-in card with screw (see letter "D" in
6. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page

Removing a PCI Add-in Card

To remove the PCI add-in card, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the screw securing the add-in card to the add-in card slot (see letter "A" in
Figure
3. Remove the PCI add-in card from the riser card connector (see letter "B" in
Figure
®
Intel Server System SR1625UR Service Guide
31).
Riser Connector
A
C

Figure 31. Installing an Add-In Card

43.
32) .
32).
Figure 31).
Figure
B
44.
"Removing the PCI Riser
Figure 31).
31).
D
AF002853
47