Removing the Intel
1. Remove the two screws as shown (see letter "A").
2. Remove the module out of the server system (see letter "B").
Installing and Removing the Intel
Installing the Intel
1. Connect the cable between the BBU and the RAID card. For details, see Intel
Battery User's Guide.
2. Locate the BBU bracket inside the chassis. Align the tabs on the plastic battery holder with
mounting holes on the BBU bracket (see letter "A").
3. Slide the plastic battery holder toward the rear of the system until the tabs engage with the
mounting holes in the BBU bracket (see letter "B").
®®
Intel
Server System R1000GZ/GL Service Guide
®
RMM4 NIC
Figure 58. Removing the Intel
®
RAID Smart Battery
Figure 59. Installing the Intel
Hardware Installations and Upgrades
®
RMM4 NIC
®
RAID Smart Battery
®
RAID Smart Battery
®
RAID Smart
35
Need help?
Do you have a question about the Server System R1000GZ and is the answer not in the manual?