Replacing A System Fan; Figure 79. Removing A System Fan - Intel SR1625UR - Server System - 0 MB RAM Service Manual

Replacing a System Fan

Caution: The system fans are NOT hot-swappable. Before removing or replacing a fan, you must
first take the server out of service, turn off all peripheral devices connected to the system,
turn off the system by pressing the power button, and unplug the AC power cord from the
system or wall outlet.
Note: The fans that are integrated into the power supply cannot be replaced separately. If one of
the fans in the power supply fails, the power supply must be replaced.
The system fans at the front of the Intel
replaced if one of them fails.
To replace a system fan, follow these steps:
1. Disconnect the fan cable from the midplane board (see letter "A" in
2. Lift the failed fan from the module (see letter "B" in
screws to loosen.
3. Position the replacement fan so the connector on the fan is at the right and pointing
down.
90
A

Figure 79. Removing a System Fan

®
Server System SR1625UR can be individually
Figure
AF002870
®
Intel Server System SR1625UR Service Guide
Figure 79).
79). There are no
B